Dodge F4B-SCEZ-35M-PSS Flange-Mount Ball Bearing

A:31 mm; L:80 mm; A2:40.2 mm; d:30.16 mm; S:15.9 mm; C0:11.2 kN; Designation of bearing:UC206-19G2T20; Weight:0.96 kg; T min.:-20 °C; T max.:200 °C;

Bearing UPC:013992025517; Dimension T:8.5 in; Bolt Size:4 x M12; Bearing - Housing - Seal:LSE111BXH; Bearing Type:Split Cylindrical Ex; Seal Type:Felt Seal; Maximum Speed:4630 rpm; Cor - Static Load Rating:19558 lbf; Support Type:Round Flange; Shaft Size:1-11/16 in;

yobi:6220DDU; da min:111; D_:180; SRE:13.14; SBRG:2; r:2.1; KBRG:6161; ra:2; DA_:25.4; Prod_Type3:DGBB_SR_DD;

L:111 mm; C0:20.8 kN; G:R1/8"; Designation of bearing:UC209-28G2L3; Designation of housing:FLE209N-; Designation of open end cover:SCOU209-28; J:148.5 mm; T max.:100 °C; Recommended tightening torque for set screw:8 Nm; N:14mm;

N2:49 mm; T min.:-20 °C; SW:3.97 mm; N:29mm; A:49 mm; Designation of housing:T209N-; s1:24.6 mm; Z:24.4 mm; T max.:200 °C; B:49.2 mm;

d:60 mm; a min:3.07 mm; Min operating temperature, Tmin:-40 °C; rs min:1.5 mm; d1:78.4 mm; a max:3.28 mm; Nlim (grease):6,400 rpm; f:2.46 mm; Max operating temperature, Tmax:120 °C; Fatigue limit load, Cu:9.1 kN;

A1:12 mm; T max.:100 °C; A:32 mm; d:22.22 mm; L:97 mm; Designation of housing:T205-; L2:10 mm; H2:51 mm; N1:16 mm; A2:24 mm;

SDM_:103.5; C:233; Oil rpm:4800; C_conv:233000; Z_:12; Prod_Type3:CRB_SR_NUP; yobi:NUP2313ET7; KBRG:4162; d:65; r:2.1;

B:15 mm; Min operating temperature, Tmin:-25 °C; ra max:1 mm; Da max:47 mm; Mass:0.13 kg; Brand:NTN; Characteristic cage frequency, FTF:0.4 Hz; Nlim (grease):8,900 rpm; Static load, C0:7.85 kN; Characteristic rolling element frequency, BSF:4.71 Hz;

C0:6.65 kN; s1:15.5 mm; J:49 mm; Recommended tightening torque for set screw:5.5 Nm; S:12.7 mm; H2:64 mm; d:15 mm; T min.:-20 °C; T max.:100 °C; E:16 mm;

Number of Lubrication Holes:6; Chamfer r1smin3:2.0 mm; Geometry Factor Cg2:0.1610; Backing Shaft Diameter ds:185.0 mm; Backing Housing Diameter Ds:217.0 mm; Lubrication Hole Diameter h:3.0 mm; DUR/DOR F/E:188.500 mm; Static Load Rating Co:696 kN; O.D. D:230.000 mm; Thermal Speed Ratings - Oil:1900 r

A:38 mm; E:15 mm; Weight:0.78 kg; B:21.4 mm; Designation of open end cover:SCOE205-25; d1:37.4 mm; Designation of closed end cover:SCCE205; S:7.5 mm; H2:72 mm; Designation of bearing:ES205G2T04;

Cg - Geometry Factor:0.203; Cone Part Number:LM565946; Cage Type:Stamped Steel; C - Cup Width:61.913 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; C0 - Static Radial Rating:663000 lbf; db - Cone Backface Backing Diameter:408.94 mm; B:85.725 mm; G1 - Heat Generation Factor (Roller-Raceway):3379.9; S

Dimension T:14.5 in; Dimension D:11.0 in; Series Type:Light Series; Dimension N:12.5 in; Ca - Axial Load Rating:2787.59 lbf; Bearing - Housing - Seal:LSE308BRHHTPS; Dimension S:2.0 in; Bearing Number:LSE308BR; Cor - Static Load Rating:51931 lbf; Dimension R:1.4 in;

B:19.050 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cone Part Number:14116; Cup Part Number:14272; Ab - Cage-Cone Frontface Clearance:1.8 mm; C0 - Static Radial Rating:13900 lbf; Aa - Cage-Cone Backface Clearance:0.5 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:12