MRC 5203SBKZZ Angular Contact Bearings

operating temperature range:Maximum of +120; bore type:Round; row type & fill slot:Double Row Non-Fill; series:42; finish/coating:Uncoated; closure type:Open; standards met:DIN 625-3; D:120 mm; cage material:Polyamide; outer ring width:31 mm;

outside diameter over tangs:145 mm; tang thickness:1.8 mm; material:Low Carbon Steel; series:AW; d:105 mm; key width:12 mm; number of tangs:19; compatible lock nut number:AN21; material:Low Carbon Steel; series:AW;

roller material:Stainless Steel; roller width:0.7500 in; roller diameter:1.2500 in; general information:a complete line of s; d:0.3750 in; radial dynamic load capacity:4470 lb; B:0.8125 in; bearing element:Needle Rollers; radial static load capacity:8600 lb; roller shape:Flat;

d:0.8750 in; maximum rpm (grease):13000 rpm; manufacturer catalog:Click here; D:52 mm; closure type:Two Nitrile Contact; row type & fill slot:Single Row Non-Fill; maximum rpm (oil):15000 rpm; snap ring included:Without Snap Ring; B:15 mm; bearing material:52100 Steel;

flanges:With Flanges; D:125 mm; closure type:Open; B:36 mm; lubrication hole type:Lubrication Groove &; cage material:Steel; operating temperature range:-20 to +120 &de; maximum rpm:4500 RPM; needle bearing type:Machined Bearing wit; static load capacity:56000 lbf;

d:2.5000 in; width:1.7600 in; type of needle bearing:Separable Inner Ring; material:Chrome Steel; closure type:N/A; D:3.0000 in; series:IR; standards met:MS 51962;

L1:22 mm; L:76 mm; C:12.8 kN; G:M6x1; s1:15.5 mm; H2:62 mm; S:12.7 mm; T max.:100 °C; A1:22 mm; T min.:-20 °C;

series:VTU; seal type:Contact/Lip; housing material:Cast Iron; expansion type:Non-Expansion Bearin; finish/coating:Uncoated; slot spacing:3.5000 in; d:1.4375 in; slot width:0.5313 in; rod hole diameter:7/8 in; locking device:Eccentric;

roller width:1.5000 in; operating temperature range:-30°F to 225° flange thickness:0.4370 in; radial static load capacity:3500 lb; bearing element:Balls - Two Rows; d:0.7500 in; roller diameter:2.5000 in; roller shape:Single Flanged; D:3.1870 in; roller material:Chrome Steel;

D1:70.8 mm; k:2.5 mm; Static load, C0:105 kN; B:23 mm; Characteristic cage frequency, FTF:0.42 Hz; Y1:2.47; rs min:1.1 mm; Number of lubrication holes:3; ra max:1 mm; Characteristic outer ring frequency, BPF0:6.64 Hz;

G:M6x1; L:125 mm; d:30.16 mm; T max.:100 °C; H3:90; Recommended tightening torque for set screw:3.7 Nm; S:17 mm; A2:36 mm; Designation of bearing:UC306-19G2; A:32 mm;

C0:20.8 kN; H:105 mm; Z:70.2 mm; d:41.28 mm; Designation of closed end cover:SCC209; A1:36 mm; L1:62 mm; H1:20 mm; s1:20.6 mm; Dz:95 mm;

B:34.8 mm; Recommended tightening torque for set screw:5.5 Nm; d1:37.4 mm; H:36.5 mm; J:105 mm; L1:42 mm; Weight:0.85 kg; T min.:-40 °C; L:140 mm; Designation of bearing:EX205G2T04;